STM32F030RCT6

STM32F030RCT6 ，超高性价比的MCU

特

点优势：

1. 多达6个串口，都支持DMA，支持中断收发。

2. STM32F030RCT6内部参考电压精度高， 而STM32F103无内部参考电压，STM32F103要用外部基准电压（参考电压）。

3. 多达16个ADC模拟采样通道，精度达12位。支持DMA.

4. 大存储器32KB SRAM,256KB Flash，适合跑小UCOS系统。

5. 大部分IO支持5V电压兼容。

6. 外设接口丰富，有IIC、SPI、 USART 、ADC 、RTC等等。

多达的 6 个Uart，全支持DMA通道，处理数据超简单， 不需要CPU干预，减少了CPU的负担。

超大存储顺，高达 32KB RAM,

256KB Flash，适合跑UCOS等小型操作系统

封装：LQFP64 10*10， 引脚兼容型号：STM32F030R8T6TR，STM32F030R8T6, STM32F051R8T6, STM32F072RBT6, STM32F091RBT6, STM32F091RCT6

官方连接：

https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f0-series/stm32f0x0-value-line/stm32f030cc.html

The STM32F030x4/6/8/C microcontrollers incorporate the high-performance ARM?Cortex?-M0 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 256 Kbytes of Flash memory and up to 32 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs and up to six USARTs), one 12-bit ADC, seven general-purpose 16-bit timers and an advanced-control PWM timer.

The STM32F030x4/6/8/C microcontrollers operate in the -40 to +85 °C temperature range from a 2.4 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.

The STM32F030x4/6/8/C microcontrollers include devices in four different packages ranging from 20 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included. The description below provides an overview of the complete range of STM32F030x4/6/8/C peripherals proposed.

These features make the STM32F030x4/6/8/C microcontrollers suitable for a wide range of applications such as application control and user interfaces, handheld equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.

Key Features

• Core: ARM? 32-bit Cortex? -M0 CPU, frequency up to 48 MHz
• Memories
  • 16 to 256 Kbytes of Flash memory
  • 4 to 32 Kbytes of SRAM with HW parity
• CRC calculation unit
• Reset and power management
  • Digital & I/Os supply: VDD = 2.4 V to 3.6 V
  • Analog supply: VDDA = VDD to 3.6 V
  • Power-on/Power down reset (POR/PDR)
  • Low power modes: Sleep, Stop, Standby
• Clock management
  • 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x6 PLL option
  • Internal 40 kHz RC oscillator
• Up to 55 fast I/Os
  • All mappable on external interrupt vectors
  • Up to 55 I/Os with 5V tolerant capability
• 5-channel DMA controller
• One 12-bit, 1.0 μs ADC (up to 16 channels)
  • Conversion range: 0 to 3.6 V
  • Separate analog supply: 2.4 V to 3.6 V
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• 11 timers
  • One 16-bit advanced-control timer for six-channel PWM output
  • Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding
  • Independent and system watchdog timers
  • SysTick timer
• Communication interfaces
  • Up to two I2 C interfaces
  • Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
  • Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames
• Serial wire debug (SWD)
• All packages ECOPACK? 2